PRODUCT INFO
CO2/MAG

Magic ARC 350A 500A 600A

MAGIC ARC II 350A 500A 600A

MAGIC PULSE 350A 500A

Yamujin (SCR) 500A 650A 800A (& Gouging)

MIG
TIG
Plasma
FILLERCON
Welding Trial Room
Welding Trial Room
E-catalogs of major products
On the Airs
HomeProduct InfoCO2 / MAG

CO2/MAG Welding Maching

PRODUCTS INFO
 
MAGIC ARC 350A 500A 600A

MAGIC ARC 350A 500A 600A

 

100% of the arc start success rate. The spatter occurrence quantity is 20 ~ 50% level of that of the existing welding machine.

The difference is generated in accordance with the available current wave design technology, its completeness, and the current area. Real time wave control technology of the welding current is being built-in. Saving of the unnecessary manpower to remove the spatter and the slag. Securing excellent welding qualit

 
MAGIC PULSE 350A

MAGIC ARC II 350A 500A 600A

 

100% of the arc start success rate. 50~80% of the spatter is reduced compared to that of the power of the existing welding machine.

The digital built-in is faster and more accurate than the spatter reducing type welding machine, MAGIC ARC.Interface is possible by the power source for the automatic and robot welding (software upgrade is possible through the CPU built-in)

 
YAMUJIN (SCR) 500A 650A 800A (& Gouging)

MAGIC PULSE 350A 500A

 

Realization of the welding spatter zero by the implementation of the spray

Securing the welding quality which is more excellent than the CO2/MAG welding or the MIG welding

Built-in wave control algorithm in accordance with the using current range and the class of the base metal. Noise prevention design

Securing excellent welding quality in case of the nonferrous metal welding including 0.8mm thin plate, galvanized steel sheet, STS, copper, and AL, etc.

Interface is possible by the power source for the automatic and robot welding (software upgrade is possible through the CPU built-in)
 
YAMUJIN (SCR) 500A 650A 800A (& Gouging)
YAMUJIN (SCR) 500A 650A 800A (& Gouging) Welding Maching

YAMUJIN pursuing the intensive A/S and high quality

Formation of the satisfactory welding bead due to the stabilization of the arc.

Realization of the low spatter and smooth arc start

All the transformers have the manufacturing processes of the drying up to 140 degree in the drying furnace, vacuum impregnation in the vacuum impregnator, and re-drying.

The quality of relay, ///mores/// pin, UL wire, and other materials is the best.

Increasing of cooling efficiency through the usage of high performance heat sink and large type fan.