100% of the arc start success rate. The spatter occurrence quantity is 20 ~ 50% level of that of the existing welding machine.

The difference is generated in accordance with the available current wave design technology, its completeness, and the current area. Real time wave control technology of the welding current is being built-in. Saving of the unnecessary manpower to remove the spatter and the slag. Securing excellent welding quality

100% of the arc start success rate. 50~80% of the spatter is reduced compared to that of the power of the existing welding machine.

The digital built-in is faster and more accurate than the spatter reducing type welding machine, MAGIC ARC.

Interface is possible by the power source for the automatic and robot welding (software upgrade is possible through the CPU built-in)

MAGIC PULSE 350A 500A

Realization of the welding spatter zero by the implementation of the spray

Securing the welding quality which is more excellent than the CO2/MAG welding or the MIG welding

Built-in wave control algorithm in accordance with the using current range and the class of the base metal. Noise prevention design

Securing excellent welding quality in case of the nonferrous metal welding including 0.8mm thin plate, galvanized steel sheet, STS, copper, and AL, etc.

Interface is possible by the power source for the automatic and robot welding (software upgrade is possible through the CPU built-in)

YAMUJIN (SCR) 500A 650A 800A combined usage of the gouging

YAMUJIN pursuing the intensive A/S and high quality

Formation of the satisfactory welding bead due to the stabilization of the arc.

Realization of the low spatter and smooth arc start

All the transformers have the manufacturing processes of the drying up to 140 degree in the drying furnace, vacuum impregnation in the vacuum impregnator, and re-drying.

The quality of relay, ///mores/// pin, UL wire, and other materials is the best.

Increasing of cooling efficiency through the usage of high performance heat sink and large type fan.